| Customization: | Available |
|---|---|
| After-sales Service: | 1years |
| Warranty: | 1 Years |
|
Still deciding? Get samples of US$ 50/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make at Made-in-china.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
AT180G-YF Three Phase Din Rail Prepaid Meter is a new generation of smart three-phase electronic energy meter. It meets the technical requirements of accuracy class 1of the IEC62053-21 standard for energy meter. It has a complete prepayment management system for energy sales management. The meter automatically deducts credit according to the electricity consumption. The recharge operation can be done remotely without any media like IC card. The meter has a two-level balance alarm function and an emergency credit function. The electricity supply will be automatically cut off when the user credit turns to zero, or reaches a preset value. It has RS485 communication interface and supports RS485 (9600 bps) high speed communication function, which is ideal for electric energy monitoring.
AT180G-YF series are featured in multi-function, multi-purpose, high stability and long life, which are suitable for real-time power monitoring system.
The meter has 1 pulse output, and the pulse constant, pulse width and output unit can be set.
| Parameter | Value | |
| Working Voltage | Rated value | 230V AC |
| Range | ±20 of rated value | |
| Measurement form | Valid value | |
| Input current | Rated value 5A | |
| Maximum current | Direct access type:100A,CT type: 1.2times of rated value | |
| Short-time overcurrent | 30 times the maximum current lasting 0.01 seconds | |
| Input Frequency | Rated Value | 50/60Hz |
| Range | 45-65Hz | |
| Voltage withstand capacity | AC withstand voltage | 4kV/1min |
| Pulse withstand voltage | 6kV-1.2μs waveform | |
| Power consumption | ≤2W | |
| Pulse port output | Can be set | |
| Pulse light output | Fixed to 1000imp/kWh | |
| Maximum reading | 999999.99kWh | |
| Measurement accuracy | Voltage, current | 0.5% |
| Frequency | 0.2% | |
| Power Factor | 0.5% | |
| Power | ±1% | |
| Energy | ±1% | |
| RS485 communication | Bus Type | RS485 |
| Communication protocol | Modbus RTU | |
| Performance standard
|
Operating Humidity | ≤90%,No condensation |
| Storage Humidity | ≤95% | |
| Operating Temperature | -25ºC~+55ºC | |
| Storage Temperature | -40ºC~+70ºC | |
| Installation category | VATII | |
| Protection class | IP51(Indoor) | |
| Insulation class | II | |
| Altitude | ≤2000m | |
){kind=link}