AT180G-YF Three Phase LCD RS485 DIN Rail Smart Energy Power Prepaid Meter

• Customization: Available
• After-sales Service: 1years
• Warranty: 1 Years
• Model NO.: AT180G-YF
• Display: Digital
• Installation: Direct Connected
• Usage: Multi-Functional Energy Meter, Watt-Hour Meter, Meter for Industry and Home Use, Standard Electric Energy Meter, Prepayment Meter, Reactive Energy Meter, Multi-rate Watt-hour Meters, Maximum Demand Meter
• Electric Equipment: Three-phase Four-wire
• Theory: Electronic Meter
• Type: Energy Meter
• Certification: ISO, CE
• Customized: Customized
• Voltage: AC100/220/230/400V
• Frequency: 45Hz~65Hz
• Accuracy Class: Active Power: Class1; Reactive Power: Class0.5
• Communication: RS 485
• IP Class: IP51
• Operation Temperature: -25℃~55℃
• Operation Humidity: ≤90%Rh
• Altitude: ≤2000m
• Average Trouble-Free Operation Time: ≥50000h
• Power Consumption: ≤5W
• Insulation Class: 2
• Transport Package: Paper Carton + Pallets
• Trademark: Antin
• Origin: Hangzhou
• HS Code: 903033900
• Production Capacity: 50000 Per Month
• Package Size: 12.00cm * 11.80cm * 8.50cm
• Package Gross Weight: 0.640kg

Product Description

AT180G-YF Three Phase Prepaid Energy Meter

AT180G-YF three-phase rail prepaid energy meter is a new generation of intelligent three-phase electronic energy meter. It meets the technical requirements of Class 1 accuracy in the IEC62053-21 energy meter standard. It has a complete prepaid management system for energy sales management. The energy meter will automatically deduct money according to the power consumption. The recharge operation can be completed remotely without any medium such as IC card. The energy meter has a two-level balance alarm function and an emergency deduction function. When the user's deduction balance is zero or reaches the preset value, the power supply will be automatically cut off. It is equipped with an RS485 communication interface and supports RS485 (9600 bps) high-speed communication function, which is an ideal choice for energy monitoring.

Specification

Applications

1.Intelligent Buildings

2.Base Station Energy Retrofit

3.Energy consumption management and energy saving analysis system
4.Power Distribution Automation System forIndustrial Enterprises
5.Electricity metering and automatic meter reading system

Key Configurations

The energy meter provides 1 pulse output, and the pulse constant, pulse width, and output unit can be set.

Large LCD display, white backlight, adjustable backlighting time
LCD support manual page and automatic rotation display

Key Configurations

Multi-function parameter measurement

Support bi-directional power metering

Support direct access or CT ratio access

Support 1 road pulse photocoupler output interface, can set the out put parameters

Support RS485 communication function, support Modbus RTU proto-col
Standard 4-module width, TH35-7.5 type rail mounting

right elevation

left elevation

front elevation

Technical Specifications

(Custom configurations available upon request.)

Parameter		Value
Working Voltage	Rated value	230V AC
	Range	±20 of rated value
Measurement form		Valid value
Input current		Rated value 5A
Maximum current		Direct access type:100A,CT type: 1.2 times of rated value
Short-time overcurrent		30 times the maximum current lasting 0.01 seconds
Input Frequency	Rated Value	50/60Hz
	Range	45-65Hz
Voltage withstand capacity	AC withstand voltage	4kV/1min
	Pulse withstand voltage	6kV-1.2μs waveform
Power consumption		≤2W
Pulse port output		Can be set
Pulse light output		Fixed to 1000imp/kWh
Maximum reading		999999.99kWh
Measurement accuracy	Voltage, current	0.5%
	Frequency	0.2%
	Power Factor	0.5%
	Power	±1%
	Energy	±1%

RS485 communication	Bus Type	RS485
	Communication protocol	Modbus RTU
Performance standard	Operating Humidity	≤90%,No condensation
	Storage Humidity	≤95%
	Operating Temperature	-25ºC~+55ºC
	Storage Temperature	-40ºC~+70ºC
	Installation category	VATII
	Protection class	IP51(Indoor)
	Insulation class	II
	Altitude	≤2000m

Drawings & Dimensions

Detailed CAD drawings and dimensional diagrams are available for download or upon inquiry. Our engineering team can provide tailored designs to meet specific project requirements.

After Sales Service

Standard Warranty: 12 months
Extended Warranty: Optional coverage up to 24 months.
Global Support: 24/7 technical assistance and spare parts supply.
Training: On-site or remote operation/maintenance training.

Company Profile

Q: How long is the order lead time?
A: Standard models are shipped in 15-30 days; customized models are shipped in 30-45 days.

Q: Do you provide overseas after-sales service?
A: Yes, we provide 24-hour after-sales service.

Q: Can I request a custom bucket size?
A: Of course! We provide custom attachments.

Q: How to place an order?
A: Contact us by email/phone to get a quote, then confirm with a purchase order.